Anagram & Information om | Engelska ordet ANODIC

Exempel på hur man kan använda ANODIC i en mening

• Electrophoretic deposition, a term for a broad range of industrial processes which includes electrocoating, e-coating, cathodic electrodeposition, anodic electrodeposition and electrophoretic coating, or electrophoretic painting.
• Electropolishing, also known as electrochemical polishing, anodic polishing, or electrolytic polishing (especially in the metallography field), is an electrochemical process that removes material from a metallic workpiece, reducing the surface roughness by levelling micro-peaks and valleys, improving the surface finish.
• In the United States Lilienfeld did research on anodic aluminum oxide films, patenting the electrolytic capacitor in 1931, the method continuing to be used throughout the century.
• Electrophoretic deposition (EPD), is a term for a broad range of industrial processes which includes electrocoating, cathodic electrodeposition, anodic electrodeposition, and electrophoretic coating, or electrophoretic painting.
• The driving power for pitting corrosion is the depassivation of a small area, which becomes anodic (oxidation reaction) while an unknown but potentially vast area becomes cathodic (reduction reaction), leading to very localized galvanic corrosion.
• Proposed explanations for drift include electric field enhanced ion migration within the gate insulator as well as electrochemical nonequilibrium conditions at the insulator solution interface, injection of electrons from the electrolyte at strong anodic polarizations, creating negative space charge inside the insulator films, and slow surface effects.
• Lithium perchlorate is chosen over alternative salts such as lithium hexafluorophosphate or lithium tetrafluoroborate when its superior electrical impedance, conductivity, hygroscopicity, and anodic stability properties are of importance to the specific application.
• Microbes can locally create hypoxic conditions at the metal surface under a biofilm and contribute to the formation of anodic (oxidation) and cathodic (reduction) sites initiating electrochemical potential differences and electrochemical corrosion.
• The measures required new sulfuric acid plants, elimination of fugitive gases from the coke plant, use of oxygenated gases in the anodic residue plant, a water treatment plant for the copper refinery, a recirculation system for cooling waters at the smelter, management and disposal of acidic solutions at the silver refinery, an industrial wastewater treatment plant for the smelter and refinery, a containment dam for the lead mud near the silent plant, a granulation process water at the lead smelter, an anode washing system at the zinc refinery, management, and disposal of lead and copper slag wastes, domestic wastewater treatment, and domestic waste disposal.
• an anodic electrochromic material, have been widely studied as counter electrodes with tungsten oxide, cathodic electrochromic material, in complementary electrochromic devices.
• The area of the metal in contact with the lower concentration of metal ions will be cathodic and will be protected, and the area of metal in contact with the higher metal ion concentration will be anodic and corroded.
• The initial syntheses in the early 1950s used fluorine gas or fluorides and anodic oxidation as the fluorinating agents, but these give explosive gaseous mixtures.
• Also, metal nanofoams can be made by electrodeposition of metals inside templates with interconnected pores, such as 3D-porous anodic aluminum oxide (AAO).
• Both the drop of potential and the change in composition of the crevice electrolyte are produced by the oxygen depletion of the solution inside the crevice (oxygen consumption caused by the metal oxidation at the inner surface of the occluded cavity) and the separation of electroactive areas, with net anodic reactions (oxidation) occurring within the crevice and net cathodic reactions (reduction) occurring at the exterior of the crevice (on the bold surface).
• Electrostatically actuated RF MEMS components offer low insertion loss and high isolation, linearity, power handling and Q factor, do not consume power, but require a high control voltage and hermetic single-chip packaging (thin film capping, LCP or LTCC packaging) or wafer-level packaging (anodic or glass frit wafer bonding).
• When viewed in isolation, the forward and reverse current waveforms mimic the appearance of a cyclic voltammogram (which corresponds to the anodic or cathodic halves, however, is dependent upon experimental conditions).
• It describes how the electrical current through an electrode depends on the voltage difference between the electrode and the bulk electrolyte for a simple, unimolecular redox reaction, considering that both a cathodic and an anodic reaction occur on the same electrode:.
• LiS batteries were invented in the 1960s, when Herbert and Ulam patented a primary battery employing lithium or lithium alloys as anodic material, sulfur as cathodic material and an electrolyte composed of aliphatic saturated amines.
• Conventional micromachining techniques such as wet etching, dry etching, deep reactive ion etching, sputtering, anodic bonding, and fusion bonding have been used in bio-MEMS to make flow channels, flow sensors, chemical detectors, separation capillaries, mixers, filters, micropumps and valves.
• The alkaline properties and the anodic passivation properties of the borate ion enhance the anticorrosion performance.

Förberedelsen av sidan tog: 147,48 ms.