Anagram & Information om | Engelska ordet BANDPASS

Exempel på hur man kan använda BANDPASS i en mening

• Typically in electronic systems such as filters and communication channels, cutoff frequency applies to an edge in a lowpass, highpass, bandpass, or band-stop characteristic – a frequency characterizing a boundary between a passband and a stopband.
• For example, a radio receiver contains a bandpass filter to select the frequency of the desired radio signal out of all the radio waves picked up by its antenna.
• At its most basic, photometry is conducted by gathering light and passing it through specialized photometric optical bandpass filters, and then capturing and recording the light energy with a photosensitive instrument.
• A band-pass filter or bandpass filter (BPF) is a device that passes frequencies within a certain range and rejects (attenuates) frequencies outside that range.
• The effect of filtering can be modeled as a convolution between a trapezoidal function that describes the illumination and one or more bandpass filters.
• In signal processing, undersampling or bandpass sampling is a technique where one samples a bandpass-filtered signal at a sample rate below its Nyquist rate (twice the upper cutoff frequency), but is still able to reconstruct the signal.
• A VCVS filter uses a voltage amplifier with practically infinite input impedance and zero output impedance to implement a 2-pole low-pass, high-pass, bandpass, bandstop, or allpass response.
• The filter outputs often include a lowpass response, and sometimes highpass, bandpass or notch responses.
• Later he added a noise generator and an envelope generator (so called 'Schlagwerk'), formant filter (several bandpass filters) and the subharmonic oscillators.
• The input signal is sent on one telephone line as-is, or in some cases upshifted to provide extra low-frequency response, and sent on a second line shifted down by 3 kHz, which is normally the upper bandpass limit in telephony.
• In signal processing, a filter bank (or filterbank) is an array of bandpass filters that separates the input signal into multiple components, each one carrying a sub-band of the original signal.
• The example given below can produce simultaneous lowpass, highpass, and bandpass outputs from a single input.
• The D2H series has a relatively weak infrared (IR) filter, allowing infrared photography with the use of an IR bandpass filter, but contaminating regular images by causing certain dark-colored fabrics to take on a slight magenta color cast.
• By shifting the frequency of the reference beam, the lowpass filter becomes a bandpass filter centered at the detuning frequency, and selective narrowband detection and imaging can be performed.
• The main difference between the two types is that the analog RTAs use a series of hardwired, analog bandpass filters to break the signal into frequency bands prior to measuring it.
• Just as each bandpass filter in the short-time Fourier transform filterbank may pass at most a single complex exponential component, two temporal events must be sufficiently separated in time that they do not lie in the same windowed segment of the input signal.
• In functional analysis, the Shannon wavelet (or sinc wavelets) is a decomposition that is defined by signal analysis by ideal bandpass filters.
• Steer, “An electronically-tunable microstrip bandpass filter using thin-film Barium Strontium Titanate (BST) varactors,” IEEE Trans.
• The contourlet transform has a fast implementation based on a Laplacian pyramid decomposition followed by directional filterbanks applied on each bandpass subband.
• A convolution of the incident X-ray bandpass, defined by the beamline monochromator, and the bandpass of the RIXS spectrometer for the analysis of the scattered photons energy gives the total (combined) energy resolution.

Förberedelsen av sidan tog: 56,77 ms.