Definition, Betydelse, Synonymer & Anagram | Engelska ordet FAIRING

Definition av FAIRING

1. (fordonsteknik) strömlinjeformad täckplåt
2. (bygg) strömlinjeformad beklädnadsplåt

Exempel på hur man kan använda FAIRING i en mening

• From their inception, Vespa scooters have been known for a painted, pressed steel body which combines, in a unified structure: a full cowling enclosure around the engine concealing dirt or grease, a flat floor panel protecting the feet, and a prominent front fairing to divert wind and rain.
• It had a fully streamlined outer casing and apart from the relatively small conning tower and a fairing which housed the diesel exhaust silencer, it had an uncluttered upper deck.
• For added safety and aerodynamics, the spacecraft is encased within a fairing with a launch escape system during liftoff.
• Velomobiles are similar to recumbent bicycles, pedal go-karts and tricycles, but with a full fairing (aerodynamic or weather protective shell) and are not to be confused with purpose-built mobiles for speed records.
• The forward fuselage was lengthened to create a rear area for a larger four-seat cockpit, and an antenna fairing was added to the tip of its vertical stabilizer.
• It dispenses with the launch escape system and supports a larger fairing to accommodate the bulkier payloads.
• Stafford and Cernan rendezvoused with the ATDA, but were unable to dock with it because the nose fairing had failed to eject from the docking target due to a launch preparation error.
• The bodywork for this car was only slightly different from the sportscar model, but the single seat was now in the centre of the cockpit, with the steering wheel, pedals, and shift lever relocated to accommodate the change and a fairing enclosing more of the cockpit opening.
• To keep the stack short and resistant to crosswinds, the first-stage kerosene tank was widened and shortened, matching the upper-stage and fairing diameters.
• Similarly the main undercarriage did not penetrate the main wing spar, designed so that when retracted only the wheel itself was inside the wing and the undercarriage struts were housed in a fairing below the wing.
• While this placement of the engine was suboptimal in terms of intake performance, incurring increased drag at high speeds due to interference from the engine-fuselage fairing junctions, the design team were aware that the Heinkel He 162, the winners of the contemporary Volksjäger ("people's fighter") design competition, had a similar engine layout and thus were encouraged as to its viability.
• KLR650-B or Tengai: The Tengai got Adventure/Dakar styling, a full fairing blending into the tank, different sidepanels, and an unsprung front mudguard.
• The SV650 immediately became popular, but American buyers wanted the sportier 'S' version that featured lower handlebars, higher foot pegs and a bikini fairing and windscreen, available only in the European and Canadian markets.
• Several of these modifications were a first for Learjet, including an all-new inboard wing cuff added to the inboard sections of the “Longhorn” wing and an all-new wing-to-body fairing.
• They have three HY-80 steel sections within the outer glass-reinforced plastic (GRP) fairing: a spherical hyperbaric chamber at the forward end to treat injured divers; a smaller spherical transfer trunk; and a cylindrical hangar with elliptical ends.
• The Lansen's nose also contained the Ericsson mapping and navigation radar, the forward antenna of which was housed in a large blister fairing underneath the fuselage, directly forward of the main landing gear; this radar worked in conjunction with the Rb 04C anti-ship missile, one of the earliest cruise missiles in western service.
• The Z8 hardtop differed from the Z07 in being a double-bubble form with a tapering fairing versus a single dome with a truncated convex rear.
• On February 14, 1964, JPL released a report noting that an internal command switch could have activated prematurely or that arcing had occurred in the umbilical connector on the payload fairing.
• In the event of an emergency, it would be lifted away from the rocket along with the reentry module, and the fairing over the spacecraft was designed to successfully split apart either circumferentially just below the reentry module in such an emergency or longitudinally if the flight should be successful.
• Sea Launch rocket components are manufactured by SDO Yuzhnoye / PO Yuzhmash in Dnepropetriwsk, USSR Dnipro, Ukraine (Zenit rocket for the first and second stages); by Energia in Kaliningrad, USSR Moscow, Russia (Block DM-SL for third stage); and by Boeing in Seattle, United States (payload fairing and interstage structure).

Förberedelsen av sidan tog: 238,74 ms.