Anagram & Information om | Engelska ordet HDPE

Exempel på hur man kan använda HDPE i en mening

• They began working together in 1946, and in 1951 invented "crystalline polypropylene" and high-density polyethylene (HDPE).
• Plastic boards are usually called PE (polyethylene) cutting boards, or HDPE (high-density polyethylene plastic), the material of which these boards are made.
• Nalgene products became popular replacements among backpackers for storing consumables; the light, wide-mouthed high-density polyethylene (HDPE) and polycarbonate bottles were more secure than plastic bags and were used for both liquids and solid foods.
• 4 US fl oz) bottles made of plant-based recyclable HDPE plastic, as well as larger 64 US fluid ounce (1.
• These are important building blocks for the production of essential polymers (LDPE, HDPE, PP) and like other chemical intermediates are currently produced mainly from petroleum feedstock.
• Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength (38 MPa versus 21 MPa) than LDPE.
• RepRaps print objects from ABS, Polylactic acid (PLA), Nylon (possibly not all extruders can), HDPE, TPE and similar thermoplastics.
• Multi-use water bottles can be made from high-density polyethylene (HDPE), low-density polyethylene (LDPE), copolyester, or polypropylene.
• LDPE has more branching (on about 2% of the carbon atoms) than HDPE, so its intermolecular forces (instantaneous-dipole induced-dipole attraction) are weaker, its tensile strength is lower, and its resilience is higher.
• More than 80% of all the material used is from the polyethylene family: crosslinked polyethylene (PEX), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), and regrind.
• From these differences in polymerization type the distinction originates between low-density polyethylene (LDPE), high-density polyethylene (HDPE) or even ultra-high-molecular-weight polyethylene (UHMWPE).
• From the 1960s onward in the United States, with improvements in shipping and storage materials, glass bottles have almost completely been replaced with either LDPE coated paper cartons or recyclable HDPE plastic containers (such as square milk jugs), depending on the brand.
• Crosslinking technology is used in the formation of EVA based foams, including LLDPE, LDPE, HDPE, PP, and TPE.
• The shelf life of pasteurized milk in HDPE bottles and LDPE pouches has been determined to be between 10 and 21 days when stored at 4–8 °C.
• Electrofusion is a method of joining MDPE, HDPE and other plastic pipes using special fittings that have built-in electric heating elements which are used to weld the joint together.
• The vast majority of flexible pond liners (aka, geomembranes) are available commercially and are manufactured using the following polymers; HDPE, LLDPE, fPP, PVC, EPDM.
• Non-metallic (includes acrylonitrile butadiene styrene (ABS), fibre-reinforced plastic (FRP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), high-density polyethylene (HDPE), Cross-linked polyethylene (PEX), and toughened glass; polybutylene has also been used, but is now banned in North America because of poor reliability).
• One approach in the field involves the conversion of waste plastics (like LDPE, PET, and HDPE) into paramagnetic, conducting microspheres or into carbon nano-materials by applying high temperatures and chemical vapor deposition.
• GAIL has 70% equity in joint venture company Brahmaputra Cracker & Polymer Limited (BCPL) in Dibrugarh, Assam with a nameplate capacity of 220 KTA of HDPE & LLDPE and 60 KTA of PP.
• One pound of pelletized HDPE contains approximately 25,000 nurdles (approximately 20 mg per nurdle).

Förberedelsen av sidan tog: 228,87 ms.