Synonymer & Information om | Engelska ordet LUFF
LUFF
Antal bokstäver
4
Är palindrom
Nej
Sök efter LUFF på:
Wikipedia
(Svenska) Wiktionary
(Svenska) Wikipedia
(Engelska) Wiktionary
(Engelska) Google Answers
(Engelska) Britannica
(Engelska)
(Svenska) Wiktionary
(Svenska) Wikipedia
(Engelska) Wiktionary
(Engelska) Google Answers
(Engelska) Britannica
(Engelska)
Exempel på hur du använder LUFF i en mening
- The tack is the corner on a fore-and-aft sail where the luff (the forward edge) and foot (the bottom edge) connect and, on a mainsail, is located near where the boom and mast connect.
- A staysail ("stays'l") is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit, or to another mast.
- It is then passed through a cringle in the luff of the sail near the foot but above the tack, and then led down on the other side to a fitting on the mast, boom or on deck.
- The throat halyard hoists the throat of the sail (the end closer to the mast) at the forward end of the gaff and bears the main weight of the sail and the tension of the luff.
- The rig consists of a triangular sail set aft of the mast with its mainsail raised to the top of the mast; its luff runs down the mast and is normally attached to it for its entire length; its tack is attached at the base of the mast; its foot (in modern versions of the rig) controlled by a boom; and its clew attached to the aft end of the boom, which is controlled by its sheet.
- A jackline is also a rope installed in the luff of a mainsail to allow the luff slides to migrate horizontally away from the mast when the sail is reefed.
- A downhaul may be attached to the boom near the gooseneck to pull the boom down and increase tension on the luff (forward edge) of the sail.
- Current Cherubs use an asymmetric spinnaker system but earlier boats used relatively large double luff spinnakers and used a notably long (9 foot) spinnaker pole.
- Most Coypu mainsails are normally raised by feeding the luff into the track on the mast, although some variants have gunter rig sails.
- An early version of staysail roller furling was as follows: the leading edge of the sail (luff) to be furled is stiffened in some way, such as by attaching it to a length of plastic pipe or by sewing in a stiffening material such as foam.
Förberedelsen av sidan tog: 146,54 ms.