Anagram & Information om | Engelska ordet OPERAND

Exempel på hur man kan använda OPERAND i en mening

• The operand '3' is one of the inputs (quantities) followed by the addition operator, and the operand '6' is the other input necessary for the operation.
• For binary numbers it is a bitwise operation that shifts all of the bits of its operand; every bit in the operand is simply moved a given number of bit positions, and the vacant bit-positions are filled in.
• Note that on some architectures the first operand of the XOR instruction specifies the target location at which the result of the operation is stored, preventing this interchangeability.
• In the case of APL the notion applies to every operand; and dyads ("binary functions") have a left rank and a right rank.
• In 1985, the i386, a 32-bit successor to those processors, introducing the IA-32 32-bit version of the x86 architecture, extended the eight 16-bit registers to 32 bits, with "E" added to the beginning of the register name; in IA-32, the memory address of an operand is the sum of one of those eight registers, one of seven of those registers (the stack pointer is not allowed as the second register here) multiplied by 1, 2, 4, or 8, and a displacement.
• There are several methods used to deal with hazards, including pipeline stalls/pipeline bubbling, operand forwarding, and in the case of out-of-order execution, the scoreboarding method and the Tomasulo algorithm.
• Operator associativity determines what happens when an operand is surrounded by operators of the same precedence, as in 1-2-3: An operator can be left-associative, right-associative, or non-associative.
• Except for explicit "load from memory" instructions, the order of operand usage is identical with the order of the operands in the data stack, so excellent prefetching can be accomplished easily.
• The Baby's single operand architecture meant that the second operand of any operation was implicit: the accumulator or the program counter (instruction address); program instructions specified only the address of the data in memory.
• In particular, note that the ternary operator allows any arbitrary expression as its middle operand, despite being listed as having higher precedence than the assignment and comma operators.
• It can be argued that this makes the addition and subtraction logic more complicated or that it makes it simpler, as a subtraction requires simply inverting the bits of the second operand as it is passed to the adder.
• For example, MIPS has no "carry bit" but a program performing multiple-word addition can test whether a single-word addition of registers overflowed by testing whether the sum is lower than an operand:.
• The pipe in APL is the modulo or residue function between two operands and the absolute value function next to one operand.
• Its left operand is a PSL regular expression and its right operand is any PSL formula (be it in LTL style or regular expression style).
• By interleaving independent instructions between the memory fetch instruction and the instructions manipulating the fetched operand, the time occupied by the memory fetch can be used for other computation.
• The DEC VAX allowed multiple memory operands for almost all instructions, and so reserved the first few bits of each operand specifier to indicate the addressing mode for that particular operand.
• He determines the number of bits needed for the different order types, suggests immediate orders where the following word is the operand and discusses the desirability of leaving spare bits in the order format to allow for more addressable memory in the future, as well as other unspecified purposes.
• When the 8086 or 8088 CPU executed the ESC instruction, if the second byte (the ModR/M byte) specified a memory operand, the CPU would execute a bus cycle to read one word from the memory location specified in the instruction (using any 8086 addressing mode), but it would not store the read operand into any CPU register or perform any operation on it; the 8087 would observe the bus and decode the instruction stream in sync with the 8086, recognizing the coprocessor instructions meant for itself.
• In less frequently used dual-operand instructions like XOR, the destination operand must be a workspace register (or workspace register pair in the case of multiply and divide instructions).
• They are related to the technologies of superscalar execution, operand forwarding, speculative execution and out-of-order execution.

Förberedelsen av sidan tog: 127,00 ms.