Synonymer & Information om | Engelska ordet RECUPERATOR

Exempel på hur man kan använda RECUPERATOR i en mening

• The turbine itself was designed primarily by Rolls-Royce with significant marine engineering and test facility input from DCN, with Northrop Grumman responsible for the intercooler, the recuperator and system integration.
• In many types of processes, combustion is used to generate heat, and the recuperator serves to recuperate, or reclaim this heat, in order to reuse or recycle it.
• In early 1915, a number of 18-pounder guns were mounted on pedestals, with the addition of a second recuperator and retaining catch for the cartridge case at high angle, in an attempt to come up with a workable anti-aircraft gun.
• Other changes to the gun include a horizontal breechblock, a muzzle brake, and a single-cylinder recoil mechanism together with a single hydropneumatic recuperator.
• Adams opines that the designers of ML-1 made several incorrect decisions, including adding an unnecessary recuperator to enhance efficiency, using a calandria-based water-tube fission heat source unproven in the "real world", using nine atmospheres of pressure at the compressor inlet that saved space but required a custom-built turbine rather than one designed for atmospheric pressures, placing insulating foil within the gas piping to improve efficiency (the foil later broke off and contaminated the closed loop with its flecks, causing deflaking problems for engineers), and using custom-built, first-of-a-kind components instead of using commercially proven aircraft or power generation derived turbines.
• They can have a recuperator capturing waste heat to improve the compressor efficiency, an intercooler and reheat.
• The redesigned system operates the same, but modifies and simplifies some components, including a new buffer and recuperator with a majority of the components removed, and adds the Suspension Lockout System (SLOS) that fixes recoil length at , which removes variable-recoil hardware, reduces stress on the carriage, and lowers buffer rod forces; the new system reduces cost, the system consists of 124 parts and the redesign will reduce that number by 40 percent to 75 parts and reusing 47 parts will consist of 65 percent for the current system, therefore only needing to manufacturing 28 new parts with overall weight savings of.
• The gun looks exactly like 155mm/39-cal M185 gun from M109A1 and is fitted with a double baffle muzzle brake, fume extractor, screw breech mechanism, hydro-pneumatic recuperator and a hydraulic recoil brake.
• The gun had short (12 calibers) barrel with eccentric interrupted screw breechblock; hydraulic recoil buffer and pneumatic recuperator were both mounted under the barrel.
• Recoil and counter-recoil were controlled hydraulically by means of a piston and spring combination connected to the recoiling mechanism and operating in an oil-filled recuperator cylinder mounted to the stationary trunnion block assembly.
• QF Mk I and II dispensed with trunnions and instead on the lower side of the breech ring were lugs to which were attached modern recoil buffer and hydrospring recuperator (runout) cylinders to absorb recoil and return the barrel to loading position after firing.

Förberedelsen av sidan tog: 182,81 ms.