Definition, Betydelse & Anagram | Engelska ordet RIVET

Definition av RIVET

1. nita (fast), fastnita, fastnagla
2. (förbandsteknik) nit, nitnagel
3. (bildligt) fästa (uppmärksamheten på)
4. (bildligt) fästa, fastnagla, frysa fast (på stället)

Exempel på hur du använder RIVET i en mening

• Fastenings used in traditional wooden boat building, such as copper nails and clinch bolts, work on the same principle as the rivet but were in use long before the term rivet was introduced and, where they are remembered, are usually classified among nails and bolts respectively.
• The Upper Works contained a rolling mill and puddling forge, a horseshoe factory, a warehouse which could store 7,000 tons of horseshoes, a rivet factory, a rivet warehouse, the stables, a supply store, and the general business office.
• This is a single-hole punch which also crimps a metal fastening loop around the hole, similar to a rivet.
• Generally, a bolt hanger (or a fixed hanger) is a combination of a fixed bolt and a specialized stainless steel hanger designed to accept a carabiner, whereas in certain regions a bolt runner (or a carrot) describes a hangerless bolt (where the climber must provide their own hanger bracket such as a rivet hanger).
• Another method is overhead jackhammering, requiring strength conditioning and endurance to hold a smaller jackhammer, called a rivet buster, over one's head.
• indicates, not only did his study vindicate the order for the inner plates established, by Muller, Klindt-Jensen, and Olmsted, but the order of the outer plates is also established by the rivet holes, the solder alignments, and the scrape marks.
• The structural rivet Cubitt used in his development of the granary inspired the hinges used by eyewear brand Cubitts, who are named after the Cubitt brothers.
• Additionally, the construction techniques had improved somewhat since early Bede designs, but fastening the panels still required drilling, deburring, dimpling, drilling again and deburring again for each rivet.
• Like many other hazing rituals, the "golden rivet" myth is perpetuated for the amusement of senior crewmembers at the expense of their naive and gullible junior crewmates.
• A common use is to allow the head of a countersunk bolt, screw or rivet, when placed in the hole, to sit flush with or below the surface of the surrounding material (by comparison, a counterbore makes a flat-bottomed hole that might be used with a socket-head capscrew).
• The contrast between a richly dyed velvet cloth and gilded rivet heads must have been impressive and, unsurprisingly, such armour was popular with high-status individuals.
• Different types of snaps can be attached to fabric or leather by riveting with a punch and die set specific to the type of rivet snaps used (striking the punch with a hammer to splay the tail), sewing, or plying with special snap pliers.
• A teetotum was no longer needed as a metal pointer could be attached to a lithographed card using a pop rivet.

Förberedelsen av sidan tog: 168,14 ms.