Definition & Betydelse | Engelska ordet SOLDERING

Definition av SOLDERING

1. böjningsform av solder
2. presensparticip av solder

Exempel på hur man kan använda SOLDERING i en mening

• It is commonly available in powder or granular form and has many industrial and household uses, including as a pesticide, as a metal soldering flux, as a component of glass, enamel, and pottery glazes, for tanning of skins and hides, for artificial aging of wood, as a preservative against wood fungus, and as a pharmaceutic alkalizer.
• Unlike a perfboard or stripboard, breadboards do not require soldering or destruction of tracks and are hence reusable.
• First developed in the 1960s and used by a small phreaker community, the introduction of low-cost microelectronics in the early 1970s greatly simplified these devices to the point where they could be constructed by anyone reasonably competent with a soldering iron or breadboard construction.
• Goldsmiths must be skilled in forming metal through filing, soldering, sawing, forging, casting, and polishing.
• To do so, he fitted homemade thimbles to his injured fingers to extend and protect them; the thimbles were made from an old Fairy Liquid bottle – "melted it down, got a hot soldering iron and shaped it like a finger" – and cut sections from a leather jacket to cover his new homemade prosthetic, However, Iommi recalls that such strings were not manufactured at the time, so he used banjo strings instead, until around 1970–71 when Picato Strings began making light-gauge guitar strings.
• The second issue elaborated more on each turtles' personalities and opened with Donatello soldering a circuit.
• Certain devices use Ball Grid Array (BGA) sockets, although these require soldering and are generally not considered user replaceable.
• The instruction books were regarded as among the best in the kit industry, being models of clarity, beginning with basic lessons on soldering technique, and proceeding with explicit step-by-step directions, illustrated with numerous line drawings; the drawings could be folded out to be visible next to the relevant text (which might be bound several pages away) and were aligned with the assembler's viewpoint.
• Induction heating allows the targeted heating of an applicable item for applications including surface hardening, melting, brazing and soldering, and heating to fit.
• The decoration is formed by first adding compartments (cloisons in French) to the metal object by soldering or affixing silver or gold as wires or thin strips placed on their edges.
• The cause of the unexpected instrument panel blankening originated from some defective soldering which caused the power transistor to overheat and fail.
• With speed welding, the plastic welder, similar to a soldering iron in appearance and wattage, is fitted with a feed tube for the plastic weld rod.
• Wood's metal, also known as Lipowitz's alloy or by the commercial names Cerrobend, Bendalloy, Pewtalloy and MCP 158, is a metal alloy that is useful for soldering and making custom metal parts, but its fumes are toxic, as well as being toxic on skin exposure.
• A reflow oven is a machine used primarily for reflow soldering of surface mount electronic components to printed circuit boards (PCBs).
• Hot air pumps blow air hot enough to melt all the solder around a small surface mounted part, and can be used for soldering parts in place, and for desoldering followed by removal before the solder solidifies by a vacuum pump or with tweezers.
• Other methods of joining materials, some of which may create permanent joints, include: crimping, welding, soldering, brazing, taping, gluing, cement, or the use of other adhesives.
• Compared to installing a modchip, a softmod is usually preferred (if available) due to not requiring having to open up the device and perform soldering, which could damage the device hardware.
• The basic equipment used during the process is a conveyor that moves the PCB through the different zones, a pan of solder used in the soldering process, a pump that produces the actual wave, the sprayer for the flux and the preheating pad.
• Front sights are mounted to the front end of the barrel by dovetailing, soldering, screwing, or staking very close to the muzzle, frequently on a "ramp".
• The large panel is broken up or "depaneled" as a certain step in the process - depending on the product, it may happen right after SMT process, after in-circuit test (ICT), after soldering of through-hole elements, or even right before the final assembly of the PCB assembly (PCBA) into the enclosure.

Förberedelsen av sidan tog: 231,33 ms.