Definition, Betydelse & Anagram | Engelska ordet FERRITE
FERRITE
Definition av FERRITE
- (metallurgi) ferrit
Antal bokstäver
7
Är palindrom
Nej
Sök efter FERRITE på:
Wikipedia
(Svenska) Wiktionary
(Svenska) Wikipedia
(Engelska) Wiktionary
(Engelska) Google Answers
(Engelska) Britannica
(Engelska)
(Svenska) Wiktionary
(Svenska) Wikipedia
(Engelska) Wiktionary
(Engelska) Google Answers
(Engelska) Britannica
(Engelska)
Exempel på hur man kan använda FERRITE i en mening
- BESM-1 had 1024 words of read–write memory using ferrite cores, and 1024 words of read-only memory based on semiconducting diodes.
- Instead of threading individual ferrite cores on wires, thin-film memory consisted of 4-micrometer thick dots of permalloy, an iron–nickel alloy, deposited on small glass plates by vacuum evaporation techniques and a mask.
- Austenitization means to heat the iron, iron-based metal, or steel to a temperature at which it changes crystal structure from ferrite to austenite.
- Davenport and Edgar Bain, it is one of the products that may form when austenite (the face-centered cubic crystal structure of iron) is cooled past a temperature where it is no longer thermodynamically stable with respect to ferrite, cementite, or ferrite and cementite.
- The core that they are wound on may either be empty (air core) or, equivalently, a magnetically neutral material like a porcelain support, or it may be a material which is good magnetic conductor like ferrite in modern high-frequency (HF) baluns, or soft iron as in the early days of telegraphy.
- The DCF77 longwave radio emission offers penetration into buildings and the time-transmissions can be received by small ferrite antennas incorporated in the case of radio-controlled low-cost time keepers without the help of exterior antennas.
- These elements are intended to alter the microstructure of carbon steels, which is usually a ferrite-pearlite aggregate, to produce a very fine dispersion of alloy carbides in an almost pure ferrite matrix.
- These bands are formed by sheets of microscopic carbides within a tempered martensite or pearlite matrix in higher-carbon steel, or by ferrite and pearlite banding in lower-carbon steels.
- Thus eddy currents are a cause of energy loss in alternating current (AC) inductors, transformers, electric motors and generators, and other AC machinery, requiring special construction such as laminated magnetic cores or ferrite cores to minimize them.
- 8% carbon; steel with less carbon content (hypoeutectoid steel) will contain a corresponding proportion of relatively pure ferrite crystallites that do not participate in the eutectoid reaction and cannot transform into pearlite.
- Record heads are constructed of laminated permalloy, ferrite, sendust or magnetoresistive materials.
- Ideal inductors only have inductive reactance, which reduces the flow of high-frequency signals by returning some of their energy back towards the signal source (possibly reducing the amount of power drawn) rather than dissipating that energy as heat (as done by the resistance in ferrite beads).
- There he was involved in the development of the Memory Test Computer (MTC), a testbed for ferrite core memory that was to be used in Whirlwind.
- A typical magnetic pickup is a transducer (specifically a variable reluctance sensor) that consists of one or more permanent magnets (usually alnico or ferrite) wrapped with a coil of several thousand turns of fine enameled copper wire.
- For example, in steel between austenite, ferrite, pearlite, bainite, cementite, and martensite, (See: Iron-carbon phase diagram).
- "Soft" magnetic materials with low coercivity and hysteresis, such as silicon steel, or ferrite, are usually used in cores.
- TDK was founded by Kenzo Saito in Tokyo, Japan, on 7 December 1935 to manufacture the iron-based magnetic material ferrite, which had been recently invented by Yogoro Kato and Takeshi Takei.
- This arrangement is used in transmission and reception magnetics of Ethernet cables and conspicuously in the form of a ferrite bead clamped to the outside of USB, laptop power supply and HDMI cables.
- However, since martensite is a non-equilibrium phase on the iron-iron carbide phase diagram, it has not been shown that warming the part after the cryogenic treatment results in the re-transformation of the induced martensite back to austenite or to ferrite plus cementite, negating the hardening effect.
- Different floppy disk types had different recording characteristics, with varying magnetic coercivity (measured in oersteds, or in modern SI units in amperes per meter), ferrite grain size, and tracks per inch (TPI).
Förberedelsen av sidan tog: 3 100,44 ms.