Synonymer & Anagram | Engelska ordet JIB

Exempel på hur man kan använda JIB i en mening

• In filmmaking and video production, a crane shot is a shot taken by a camera on a moving crane or jib.
• A backstay is a piece of standing rigging on a sailing vessel that runs from the mast to either its transom or rear quarter, counteracting the forestay and jib.
• The usual sailing rig was single masted, with a gaff mainsail and two headsails - the jib was set on a bowsprit and the staysail to the stemhead.
• The Albacore's rig uses swept spreaders supporting a tapered mast, a powerful vang, and adjustable jib halyard and other sail controls to depower in high winds.
• In a design philosophy that is both practical and highly redolent of social attitudes of the day the intention was that she should accommodate a family comprising parents plus two children, and specifically that the jib should be modest enough for "Mum" or older children to handle, while she should perform well enough to give "Dad" some excitement when not taking the family out.
• Its larger surface area increases the speed of the craft in light to moderate winds; in high wind, a smaller jib is usually substituted, and downwind a spinnaker may be used.
• It has been pointed out, however, that the skippers of Thames sailing barges also used the term spinnaker for their jib staysails.
• The modern Bermuda rig uses a triangular mainsail aft of the mast, closely coordinated with a jib for sailing upwind.
• The headsails were a staysail, set on the forestay (which fastened to the stemhead), a jib, set flying to a traveller on the bowsprit and, in most cases, a flying jib (alternatively termed a jib-topsail) also set flying, but to a higher point on the mast.
• Instead, when running downwind a whisker pole is used to hold the jib out to windward for correct wind flow.
• His Port Glasgow shipyard donated new steel masts, and topgallants, jib and spanker booms of Oregon pine.
• The boat is sailed without a spinnaker, but it is equipped with a whisker-pole that is extending outward to hold the shape of the jib when sailing downwind.
• Small sailboats also called dinghies are commonly made from fiberglass, and will have wood, aluminum, or carbon-fiber spars, and generally a sloop rig (two sails: a mainsail and a jib, commonly include 3rd sail the spinnaker for going downwind).
• These "stern-steerer" iceboats were generally rigged as sloops, with a jib sail forward of the mast, although the catboat style with a single sail was also used.
• The typical couta boat carried a gaff sail and jib, set out on a long bowsprit, although the mainsail developed into more of a gunter sail, because it had a very high-peaked gaff or yard.
• A symmetrical spinnaker has two sheets, an "active" one and a "lazy" one, in the same way as a jib, but they are attached to the sail's two separate clews.
• Since the camera operator is usually not able to use the camera's controls directly or look through the camera's viewfinder, a jib is often used in conjunction with a remote control systems for focus, and/or zoom and/or camera function and with a portable video monitor mounted near the jib operator.
• It is not symmetric like a true spinnaker but is asymmetric like a genoa, but the gennaker is not attached to the forestay like a jib or genoa.
• Today's technologies in spars, rigging, sailmaking, powered winches and electronics enable rigs with larger sail areas, higher aspect ratios, larger loads and simpler handling, allowing Mirabella V to be constructed with the tallest mast and largest jib of any sailing craft ever built at the time.
• There were two types: wooden gantry cranes pivoting on a central vertical axle and stone tower cranes which housed the windlass and treadwheels with only the jib arm and roof rotating.

Förberedelsen av sidan tog: 192,31 ms.