Anagram & Information om | Engelska ordet OHV

Exempel på hur man kan använda OHV i en mening

• There is a cafe, a church, a small park, a community center, a small market, two bars, OHV rentals and a gas station.
• Hunting, fishing, snowmobiling and ATV riding are popular attractions and the town is connected to an extensive system of off-highway vehicle (OHV) trails.
• The Cadillac V16 engine was initially produced with a displacement of , OHV and a V-angle of 45 degrees.
• These engines (a short-stroke unit based on the Ford Anglia with a special 2-valve Cosworth or Holbay OHV down-draught head, initially pioneered by Brian Hart, being by far the most efficient and popular) tended to rev very highly and were popularly known as "screamers"; F3 races tended to involve large packs of slipstreaming cars.
• 5-litre "Poissy" OHV engines, 4-speed gearboxes, and torsion-bar suspension, the Horizon earned praise for its crisp styling, supple ride, and competent handling.
• It was replaced by the GM LS small-block OHV engine, used in newer Cadillac V8 models like the CTS-V, marking a step back to a simpler, more reliable pushrod engine design.
• Most models were fitted with Rutenber Straight-6 engines and Grant Lees or Muncie gearboxes; some, however, had imported OHV Ansted engines instead.
• The valves in both OHC and OHV engines are located above the combustion chamber; however an OHV engine requires pushrods and rocker arms to transfer the motion from the camshaft up to the valves, whereas an OHC engine has the valves directly actuated by the camshaft.
• After an early flirtation with V-twin engines, Mazda's small cars of the 1960s were powered by OHV straight-2 and straight-4 engines.
• The CHT became known as a smooth running engine with good performance at low engine speeds, but as an OHV design it suffered in comparison to the contemporary SOHC Volkswagen EA827 engine, while also producing less power.
• The HSC engine has a cast iron block and head, with a single cam-in-block and two overhead valves (OHV) per cylinder with pushrods and rocker arms.
• In these traditional OHV engines, the motion of the camshaft is transferred using pushrods (hence the term "pushrod engine") and rocker arms to operate the valves at the top of the engine.
• All were 90° water-cooled V8 OHV pushrod engines, and all were naturally aspirated except one turbocharged version of the 215.
• The sidevalve ME10 displaces 886 cc (TM4 and TM5 three-wheeled trucks), while the later, OHV ME12 is of 851 cc.
• Its compact straight-six engine outlasted the model itself and was produced to the end of the 1964 model year, with a change to an OHV design in 1961.
• The previous advanced overhead-cam inline-four engine was by then not in use by any other production car so it was replaced by the MPJG OHV unit from the Wolseley Ten, but with twin SU carburettors, modified camshaft and manifolding.
• The Y-block's development was in response to the sales success of the competing Oldsmobile "Rocket" and Cadillac OHV V8 engines, introduced in the 1949 model year, the Buick "Nailhead" engine introduced in the 1953 model year, and the OHV V8 Chrysler Hemi engine in 1951.
• On most overhead valve (OHV) engines, proper clearance between the camshaft and tappet is achieved by turning a set screw in the end of the rocker arm that contacts the end of the pushrod until a desired gap is achieved using a feeler gauge.
• There were also 40 98cc OHV four-stroke NSU-Vincents, and Vincent also sold the "NSU Quickly" moped; too well it appears (selling about 20,000 in one year – a footnote to how the market had changed again), as NSU took control of its own sales after a year.
• Motorcycles use poppet valves in a range of designs: side valve, overhead valve (OHV) with pushrod operation, overhead cam (SOHC), and double overhead cam (DOHC).

Förberedelsen av sidan tog: 178,72 ms.