Anagram & Information om | Engelska ordet SANDING

Exempel på hur man kan använda SANDING i en mening

• Shellac functions as a tough natural primer, sanding sealant, tannin-blocker, odour-blocker, stain, and high-gloss varnish.
• Power tools are used in industry, in construction, in renovation, in the garden, for housework tasks such as cooking, cleaning, and around the house for purposes of driving (fasteners), drilling, cutting, shaping, sanding, grinding, routing, polishing, painting, metal working, wood working, heating and more.
• Scraping produces a cleaner surface than sanding; it does not clog the pores of the wood with dust, and does not leave a fuzz of torn fibers.
• 1994: To avoid a head-on collision with a highway sanding truck, a tour bus carrying 21 passengers swerved into a snowbank.
• As built, the engine had a straight boiler (not tapered from a larger diameter at the firebox end to a smaller diameter at the smokebox end), had the balloon stack typical of wood burning engines, and three domes—the center of which was for sanding the rails to improve traction when needed.
• Although by the 1860s the 2-2-2 configuration was beginning to be superseded by the 2-4-0 type with better adhesion, the invention of steam sanding gave 2-2-2 singles a new lease of life, and they continued to be built until the 1890s.
• The water horsetail has historically been used by both Europeans and Native Americans for scouring, sanding, and filing because of the high silica content in the stems.
• The Avanti West Coast operated units are fitted with a Vossloh fixed rate sander and the Arriva Cross Country operated units are fitted with AB Hoses and fittings variable rate sanding system.
• She applies gesso to prime the wood and then up to 40 coats of acrylic paint, alternating brushstrokes between horizontal and vertical directions and sanding between layers.
• Additional modifications were carried out at Stewarts Lane TMD including the installation of cab air-conditioning, sanding equipment, a 750 V busline, shore supply sockets and the removal of overhead line equipment.
• In this aspect, pole lathe tools do not perform satisfactorily for very long on power lathes and power lathe tools give a poor finish on a pole lathe that will need to be improved by scraping or even sanding after the work piece has dried adequately.
• New lumber, such as pine, can have waxlike sealants put on at the mill that will prevent proper staining; stripping or sanding the surface may be required.
• Through authority vested in the United States Department of Housing and Urban Development (HUD), lead-based-paint removal by dry scraping, dry sanding, torching and burning, the use of heat guns over 1100°F, and machine-sanding / grinding without a HEPA-filtered vacuum or a HEPA filtered dust collection system, is prohibited, as these methods have been proven to produce significant amount of lead dust during renovation, remodeling and painting.
• Profile sander: An industrial machine consisting of a powered transport with a series of workstations for performing shaping, sanding, or other finish operations on one or more edges of components in cabinetry, furniture, shelving, and other products.
• In woodworking, wide belt sanders use platens to press the sanding paper into contact with the wood being sanded.
• All stucco or popcorn or texture scraping, sanding, wallpaper removal, caulking, drywall or wood repair, patching, stain removal, filling nail holes or any defects with plaster or putty, cleaning, taping, preparation and priming are considered to be done by the professional contracted painter.
• The Shopsmith is a lathe-based multi-tool that uses a single motor to perform lathe, tablesaw, sanding, and drill press functions.
• Incidents of wheelslip were observed during the type's initial operations; remedial adjustments included additional sanding equipment and softer primary vertical springs on the centre axle to improve equalisation across all axles.
• They had a whole range of advanced features, such as 18" X 26" cylinders, together with piston valves, roller-type big-end and side-rod bearings, manganese steel axle-box and horn plate liners, hopper ashpans, self-cleaning smokeboxes, rocking grates and Lambets wet sanding.
• Exposure to the dust generated by cutting and sanding purpleheart can cause skin, eye, and respiratory irritation and nausea, possibly because of the presence of dalbergione (neoflavonoid) compounds in the wood.

Förberedelsen av sidan tog: 233,61 ms.